Material: Stainless steel 1.4305 (AISI 303).

Concentricity: about 0,02 mm.

Tolerance: Shaft k6-h10, Hub H8.

Mounting: The bush is mounted quickly. Just place the bush inside the hub and push both onto the shaft. Fasten with Allen key.

Demounting: Remove tensioning screws. Put screws in forcing thread and fasten them until the bush is pressed off.

MN = transmittable torque at load of 0. If the screws are fastened with Manz.

Fa = transmittable axial force at torque of 0. If the screws are fastened with Manz.

Manz = required fastening torque for the screws.

The dimensions refer to bushes before assembly.