Bevel gear made of stainless steel 1.4305 module 1.5 30 teeth i=2:1 SKU: 36099757
Bevel gear made of stainless steel 1.4305 module 1.5 30 teeth i=2:1
Op voorraad
SKU
36099757
€ 60,60
Material: Stainless steel 1.4305 (AISI 303).
Tooth quality 8 modelled on DIN 3967 (from module 2). Crowned, milled teeth. Shaft angle 90º. The bevel gears only run as a pair at the stated ratio and at the same module.
Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio.
| Art.nr. | Aantal | prijs | b | da | d | BH7 | Transmission | ND | NL | L1 | L | S | E | Corresponding Counter Wheel | b | da | d | NL | ND | L | L1 | E | S | No. of teeth | Module | Admissible MD |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 36099757 |
|
€ 60,60
|
7.6 | 45.9 | 45 | 10 | 2:1 (15/30) | 30 | 12 | 18 | 20.7 | 17.6 | 28 | 36099756 | 7.6 | 45.9 | 45 | 12 | 30 | 20.7 | 18 | 28 | 17.6 | 30 | 1.5 | 0.54 |
