Rod end GS DIN ISO 12240-4 series K external thread M18x1.5 left = Initial lubrication required before use = SKU: 63231800
Rod end GS DIN ISO 12240-4 series K external thread M18x1.5 left = Initial lubrication required before use =
Op voorraad
SKU
63231800
€ 41,80
Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Special brass CuZn40Als. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed.
- Heavy-duty rods end for high radial and axial alternating loads.
- Steel on high-duty brass.
- Can be re-lubricated (only from size 6mm).
- Sliding speed up to 60 m/min.
Initial lubrication required before use
| Art.nr. | Aantal | prijs | Weight | h | d1 | l1 | d2 | Thread Type | dH7 | B-0,1 | C1 | Thread ISO DIN 13 6H/ 6g M | Thread Slope | Tipping Angle Alpha | Rod ends GS DIN ISO 12240-4, K, re-lubricateable, external thread |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 63231800 |
|
€ 41,80
|
267 | 72 | 21.8 | 44 | 46 | links | 18 | 23 | 16.5 | M18x1,5 | 1.5 | 15 | Can be re-lubricated (only from size 6mm). |
