Rod end GS DIN ISO 12240-4 series K internal thread M30x2 left = Initial lubrication required before use = SKU: 63213000
Rod end GS DIN ISO 12240-4 series K internal thread M30x2 left = Initial lubrication required before use =
Op voorraad
SKU
63213000
€ 90,00
Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Special brass CuZn40Als. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed.
- Heavy-duty rod ends for high radial and axial alternating loads.
- Steel on high-duty brass.
- Can be re-lubricated (only from size 5mm).
- Sliding speed up to 60 m/min.
Initial lubrication required before use
| Art.nr. | Aantal | prijs | Weight | d4 | W | d1 | d3 | d2 | h1 | Thread Type | dH7 | B-0,1 | C1 | l3 +0/-1,0 | Thread ISO DIN 13 6H/ 6g M | Thread Slope | Tipping Angle Alpha | Rod ends GS DIN ISO 12240-4, K, re-lubricateable, internal thread |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 63213000 |
|
€ 90,00
|
1130 | 51 | 41 | 34.8 | 40 | 70 | 110 | links | 30 | 37 | 25 | 51 | M30x2 | 2 | 17 | Note: The specific loading of rod ends and spherical-plain bearings differs in each application. Therefore general statements by a producer in a catalogue may not totally fit to the single application. In all cases the user has to coordinate the theoretic |
