Rod end GS DIN ISO 12240-4 series K internal thread M3 left = Initial lubrication required before use = SKU: 63210300
Rod end GS DIN ISO 12240-4 series K internal thread M3 left = Initial lubrication required before use =
Op voorraad
SKU
63210300
€ 17,90
Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Special brass CuZn40Als. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed.
- Heavy-duty rod ends for high radial and axial alternating loads.
- Steel on high-duty brass.
- Can be re-lubricated (only from size 5mm).
- Sliding speed up to 60 m/min.
Initial lubrication required before use
| Art.nr. | Aantal | prijs | Weight | d4 | W | d1 | d3 | d2 | h1 | Thread Type | dH7 | B-0,1 | C1 | l3 +0/-1,0 | Thread ISO DIN 13 6H/ 6g M | Thread Slope | Tipping Angle Alpha |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 63210300 |
|
€ 17,90
|
6 | 6.5 | 5.5 | 5.1 | 5 | 14 | 21 | links | 3 | 6 | 4.5 | 10 | M3 | 0.5 | 14 |
