Sprockets KRS with One-Sided Hub Pitch 8mm ISO 05 B-1
Op voorraad
SKU
Sprockets_KRS_with_One-Sided_Hub_Pitch_8mm_ISO_05_B-1
| Art.nr. | da | d | ND | L | B | No. of teeth | Weight | No. of Teeth | da | d | ND | B | L | Sprockets KRS with One-Sided Hub, 05 B-1, Pitch 8mm | Sprockets KRS with One-Sided Hub, 05 B-1, Pitch 8mm | Aantal | prijs |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 10080800 | 24 | 20.9 | 13 | 12 | 6 | 8 | 12 | 8 | 24 | 20.9 | 13 | 6 | 12 | Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. | Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. |
|
€ 2,00
|
| 10080900 | 26.6 | 23.39 | 15 | 12 | 6 | 9 | 17 | 9 | 26.6 | 23.39 | 15 | 6 | 12 | Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. | Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. |
|
€ 2,00
|
| 10081000 | 29.2 | 25.89 | 17 | 12 | 8 | 10 | 21 | 10 | 29.2 | 25.89 | 17 | 8 | 12 | Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. | Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. |
|
€ 2,00
|
| 10081100 | 31.7 | 28.39 | 18 | 13 | 8 | 11 | 25 | 11 | 31.7 | 28.39 | 18 | 8 | 13 | Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. | Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. |
|
€ 2,00
|
| 10081200 | 34.2 | 30.91 | 20 | 13 | 8 | 12 | 33 | 12 | 34.2 | 30.91 | 20 | 8 | 13 | Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. | Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. |
|
€ 2,80
|
| 10081300 | 36.7 | 33.42 | 23 | 13 | 8 | 13 | 43 | 13 | 36.7 | 33.42 | 23 | 8 | 13 | Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. | Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. |
|
€ 3,00
|
| 10081400 | 39.2 | 35.95 | 25 | 13 | 8 | 14 | 53 | 14 | 39.2 | 35.95 | 25 | 8 | 13 | Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. | Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. |
|
€ 2,30
|
| 10081500 | 41.7 | 38.48 | 28 | 13 | 8 | 15 | 66 | 15 | 41.7 | 38.48 | 28 | 8 | 13 | Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. | Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. |
|
€ 2,40
|
| 10081600 | 44.3 | 41.01 | 30 | 14 | 8 | 16 | 81 | 16 | 44.3 | 41.01 | 30 | 8 | 14 | Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. | Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. |
|
€ 2,80
|
| 10081700 | 46.8 | 43.53 | 30 | 14 | 8 | 17 | 83 | 17 | 46.8 | 43.53 | 30 | 8 | 14 | Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. | Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. |
|
€ 2,80
|
| 10081800 | 49.3 | 46.07 | 30 | 14 | 8 | 18 | 88 | 18 | 49.3 | 46.07 | 30 | 8 | 14 | Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. | Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. |
|
€ 2,90
|
| 10081900 | 51.9 | 48.61 | 30 | 14 | 8 | 19 | 93 | 19 | 51.9 | 48.61 | 30 | 8 | 14 | Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. | Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. |
|
€ 2,90
|
| 10082000 | 54.4 | 51.14 | 30 | 14 | 8 | 20 | 97 | 20 | 54.4 | 51.14 | 30 | 8 | 14 | Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. | Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. |
|
€ 2,90
|
| 10082100 | 57 | 53.68 | 35 | 14 | 8 | 21 | 122 | 21 | 57 | 53.68 | 35 | 8 | 14 | Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. | Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. |
|
€ 3,30
|
| 10082200 | 59.5 | 56.21 | 35 | 14 | 8 | 22 | 127 | 22 | 59.5 | 56.21 | 35 | 8 | 14 | Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. | Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. |
|
€ 3,30
|
| 10082300 | 62 | 58.75 | 35 | 14 | 8 | 23 | 133 | 23 | 62 | 58.75 | 35 | 8 | 14 | Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. | Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. |
|
€ 3,90
|
| 10082400 | 64.6 | 61.29 | 35 | 14 | 8 | 24 | 138 | 24 | 64.6 | 61.29 | 35 | 8 | 14 | Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. | Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. |
|
€ 4,20
|
| 10082500 | 67.5 | 63.83 | 35 | 14 | 8 | 25 | 141 | 25 | 67.5 | 63.83 | 35 | 8 | 14 | Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. | Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. |
|
€ 4,30
|
| 10082600 | 69.5 | 66.37 | 40 | 16 | 10 | 26 | 189 | 26 | 69.5 | 66.37 | 40 | 10 | 16 | Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. | Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. |
|
€ 4,60
|
| 10082700 | 72.2 | 68.91 | 40 | 16 | 10 | 27 | 193 | 27 | 72.2 | 68.91 | 40 | 10 | 16 | Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. | Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. |
|
€ 5,30
|
| 10082800 | 74.8 | 71.45 | 40 | 16 | 10 | 28 | 202 | 28 | 74.8 | 71.45 | 40 | 10 | 16 | Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. | Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. |
|
€ 4,30
|
| 10082900 | 77.3 | 73.99 | 40 | 16 | 10 | 29 | 204 | 29 | 77.3 | 73.99 | 40 | 10 | 16 | Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. | Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. |
|
€ 6,90
|
| 10083000 | 79.8 | 76.53 | 40 | 16 | 10 | 30 | 215 | 30 | 79.8 | 76.53 | 40 | 10 | 16 | Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. | Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. |
|
€ 5,70
|
| 10083100 | 82.4 | 79.08 | 40 | 16 | 10 | 31 | 210 | 31 | 82.4 | 79.08 | 40 | 10 | 16 | Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. | Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. |
|
€ 7,30
|
| 10083200 | 84.9 | 81.61 | 40 | 16 | 10 | 32 | 220 | 32 | 84.9 | 81.61 | 40 | 10 | 16 | Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. | Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. |
|
€ 6,10
|
| 10083300 | 87.5 | 84.16 | 40 | 16 | 10 | 33 | 224 | 33 | 87.5 | 84.16 | 40 | 10 | 16 | Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. | Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. |
|
€ 7,80
|
| 10083400 | 90 | 86.7 | 40 | 16 | 10 | 34 | 230 | 34 | 90 | 86.7 | 40 | 10 | 16 | Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. | Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. |
|
€ 8,40
|
| 10083500 | 92.5 | 89.25 | 40 | 16 | 10 | 35 | 236 | 35 | 92.5 | 89.25 | 40 | 10 | 16 | Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. | Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. |
|
€ 7,10
|
| 10083600 | 95 | 91.79 | 40 | 16 | 10 | 36 | 245 | 36 | 95 | 91.79 | 40 | 10 | 16 | Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. | Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. |
|
€ 6,70
|
| 10083700 | 97.6 | 94.33 | 40 | 16 | 10 | 37 | 253 | 37 | 97.6 | 94.33 | 40 | 10 | 16 | Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. | Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. |
|
€ 9,10
|
| 10083800 | 100.2 | 96.88 | 40 | 16 | 10 | 38 | 267 | 38 | 100.2 | 96.88 | 40 | 10 | 16 | Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. | Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. |
|
€ 6,70
|
| 10083900 | 102.7 | 99.42 | 40 | 16 | 10 | 39 | 270 | 39 | 102.7 | 99.42 | 40 | 10 | 16 | Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. | Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. |
|
€ 9,80
|
| 10084000 | 105.3 | 101.97 | 40 | 16 | 10 | 40 | 283 | 40 | 105.3 | 101.97 | 40 | 10 | 16 | Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. | Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. |
|
€ 8,20
|
| 10084500 | 118 | 114.69 | 60 | 20 | 12 | 45 | 575 | 45 | 118 | 114.69 | 60 | 12 | 20 | Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. | Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. |
|
€ 11,10
|
| 10084800 | 125.6 | 122.32 | 60 | 20 | 12 | 48 | 605 | 48 | 125.6 | 122.32 | 60 | 12 | 20 | Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. | Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. |
|
€ 14,30
|
| 10085000 | 130.7 | 127.41 | 60 | 20 | 12 | 50 | 625 | 50 | 130.7 | 127.41 | 60 | 12 | 20 | Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. | Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. |
|
€ 14,40
|
| 10085700 | 148.6 | 145.22 | 80 | 20 | 14 | 57 | 990 | 57 | 148.6 | 145.22 | 80 | 14 | 20 | Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. | Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. |
|
€ 15,90
|
| 10086000 | 156.2 | 152.85 | 80 | 34 | 16 | 60 | 1535 | 60 | 156.2 | 152.85 | 80 | 16 | 34 | Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. | Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. |
|
€ 19,20
|
| 10087600 | 197.7 | 193.59 | 80 | 25 | 20 | 76 | 1415 | 76 | 197.7 | 193.59 | 80 | 20 | 25 | Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. | Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. |
|
€ 23,10
|
